AN OVERVIEW OF FLANGE NUTS


A flange nut is a type of nut which has a wide flange at one end which acts as an integrated washer. Made up of hardened steel and coated zinc, flange Nuts are used for a variety of applications, depending on the style purchased and has a hexagonal type shaped. To avoid damage to the part, this nut distributes the pressure of nut over the part being secured.




In simple words, “Flange nuts” are a type of fastener with a wide bottom circular flange. Their “washer like” base helps in distributing the load pressure of the nut uniformly over a large surface area. The shape of flange locknuts is hexagonal and is used in assembly lines where workers have to speed up the work process.

Flange Nut provides a locking action that may be serrated. For rotating the nut in a proper direction, the serrated flange nuts are angled in a proper manner that would loosen the nut. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of nut. For creating a stable structure, flange nuts sometimes use a swivel flange (used in joining wood and plastic). Also termed serrated face nuts, spin lock or serrated tooth nuts, this type of fastener provides more resistance to vibration. As the nut is tightened onto the joint, the mating surface is scored by those serrations and a locking fit is achieved.
Advantages of Flange Nuts
·         Flange Nuts can be adjusted and removed after installation.
·         Flange nuts can be used for a limited number of times because the prevailing torque declines each time it is used.
·         Other Advantage of Flange nuts is that this nut works perfectly fine in case of diminishing preload by using their remaining rotation resistance
Disadvantage of Flange Nuts
·         These types of Nuts are not considered suitable for long threaded assemblies because when the nut travels along the threads, it damages the nut’s locking feature.

·         Other Disadvantage of Flange nut is that it uses distortion to provide a tight fit.
·         Risk of Corrosion is high when painted or coated.

Designs and Dimensions of Flange Nuts

Stainless Steel Flange Nuts mainly has a wide variety of designs. Depending on the use of the nut the shape and other features are designed. The purpose of these designs is that the nuts are useful for the bolts that will be used to tighten them. For instance, in some cases the square nuts are used to tighten the parts with the square bolts. Each nuts fastener has a different specification and design. Each nuts fastener also has a different use for which they are designed. Such as Hex Nuts, it has a shape designed in the shape of a 'Hex' from which its name derives.
Flange Nuts Uses
Now that we know what a flange nut is, and what are its pros and cons, let us know look at some of its applications in the following fields.



  1. ·      Used for fixing at Light Poles
  2. ·      For Joining Metals Sheets or Metals
  3. ·      Mainly used in heavy industrial Applications
  4. ·      Used in Elevators
  5. ·      In Marine Applications
  6. ·      Lifting applications (wires, etc.)
  7. ·      In assembling various parts of industrial applications
  8. ·      Frame Applications
  9. ·      At the Construction Site
  10. ·      Buildings
  11. ·      For Fixing Furniture
  12. ·      Pipelines Industries uses flange nuts
  13. ·      Automotive Parts


For a Detailed Information about Flange Nuts, visit this Article

Quick Links:

·         Types of Bolts used by Engineers
·         Different Types of Stainless-Steel Screws used for Industrial Applications
·         A Detailed Information on Washers
·         Rivet Guns uses and its Applications
·         Fastener Manufacturer in India

Comments

Post a Comment

Popular posts from this blog

HEX NUTS AND ITS SPECIFICATION

Image
v   What are Hex Nuts? One of the most common nuts available are the Hex nuts that are used with anchors, bolts, screws, studs or any other fastener which has machine screw threads. This Nuts are widely used for industrial and commercial use. Hex, as the name suggests, is short-form off Hexagon. Hex nuts have six sides in the shape of a Hexagon. Hex Full Nuts, Finished Hex Nuts are some of the names given to Hex Nuts. Hex Nuts are required for fastening purpose. Though, the design of a hex nuts is simple but they are created to deliver high end efficiency and Performance. The size of hex Nuts, typically varies from ¼” to about 2 ½” and are available in different Strength Grades. The Grades are given on the basis of Strength and cost of the nuts.   Stainless steel hex nuts and bolts/screws used together are susceptible to thread galling and seizing. While it may not be completely preventable, it can be substantially reduced. A thread lubricant is the most ef...
Read more

Manufacturing Process for Fasteners in 7 steps

Image
A fastener is a hardware component used universally for fixing joints with two or more things non-permanently. In general, fasteners are used to create non-permanent joints i.e. joints that can be removed or dismantled without harming or damaging the joining components.  Welding is an example of creating permanent joints. Fastener holds the joints of fixtures form holding the chairs & tables to automobile parts. Applications of fasteners are very diverse in the range from regularly used items like boxes, envelope where fasteners are used for closing them to hi- tech gazebos & special-purpose closing devices like the bread clip etc. Fasteners exporter in Germany will discuss the manufacturing process of fasteners. Step-1: Raw material inspection & storage Raw material for the bolt to be decided upon the designer based upon where it is to be used. Material to be used to be inspected & then proper storage location to be identified in order to avoid r...
Read more

Different types of Fasteners

Image
Bolts : Bolts are used to make a bolted joint. A bolted joint is created by a bolt and a nut together. Where a Nut is used to tighten the grip between the flange or such product where bolt is used. Basically bolts are used for the assembly of two unthreaded components with the help of a nut.  Nuts : Nuts are a type of Fasteners that has a hole in it. The hole in the Nuts is always threaded. The nut is paired with the bolt which is its pairing partner. The Nuts are always used with the pairing Bolts to tighten. Click here to know more about nuts manufacturers in Canada . Screws : Screws is a fastener that is similar to the bolts in many ways. The Screws are made of metals and characterized by helical ridge. Screws is also known as male thread. Screws are used to fasten the materials by digging in and welding into a material. Screws don't require nuts to tighten the screws.  Thread Rods : Threaded Rods is a fastener that is also known as 'Studs'. The Thr...
Read more