caliber enterprises

A fastener is a hardware component used universally for fixing joints with two or more things non-permanently. In general, fasteners are used to create non-permanent joints i.e. joints that can be removed or dismantled without harming or damaging the joining components.  Welding is an example of creating permanent joints. Fastener holds the joints of fixtures form holding the chairs & tables to automobile parts. Applications of fasteners are very diverse in the range from regularly used items like boxes, envelope where fasteners are used for closing them to hi- tech gazebos & special-purpose closing devices like the bread clip etc. Fasteners exporter in Germany will discuss the manufacturing process of fasteners. Step-1: Raw material inspection & storage Raw material for the bolt to be decided upon the designer based upon where it is to be used. Material to be used to be inspected & then proper storage location to be identified in order to avoid r...

1. Do not Use 18-8 Stainless Steel in or Near A Salt Water Area Saltwater is great at causing rust & reducing the life of fasteners. To remedy this, we recommend to use stainless steel and the correct grade of stainless steel needs to be used. We generally recommend using only 316-grade stainless steel within twenty miles of the saltwater area. Otherwise the risk of oxidization (rust), even in other grades of stainless steel, are greatly increased. Caliber fasteners are leading  fasteners manufacturer in New Zealand  and many other countries. 2. Always Mate Hot Dip Galvanized Fasteners with Other Hot Dip Galvanized Fasteners Hot Dip Galvanized fasteners are coated with a thick zinc protective which is called hot dip galvanization, to make them less susceptible to oxidization. This thick coating of zinc creates a layer on the threading which will not match other materials that don’t have this coating. Fasteners that get hot dip galvanized & have differ...

·          Anchor bolts: Description: Bolts with a threaded part in one end and a non-threaded L shaped part on the other. Usually found with a washer and a nut. Made to be rust-resistant. Uses: Securing light poles, structural beams and to fasten equipment to concrete. ·          Carriage bolts: Description: Fully threaded bolts with a smooth head and a square or ribbed undercut that blocks the bolt from turning when tightened. Uses: Fasten metal to wood. To know more about bolts and other fasteners visit fasteners manufacturer in India . ·          Elevator bolts: Description: Fasteners with a thin flat or countersunk head and a square undercut that blocks the bolt from turning when tightened. Uses: Elevators and conveyor systems. ·          Hex bolts Description: Bolts that a...